cisco receiver counting down letters and numbers

Verify that you have configured the appropriate Partition/CSS on extension 500 and that the Route Pattern/GW has the correct CSS. internal extension calls are working fine since I added calling search space from the head office to the new calling search space as extension 500 can call extension 600 etc.extension 500 can dial 9 and it can call outside phone number such as 1(213)567-8888 etc.Pointed x500 to the new Route Partition and calling search spaceĭescription *** For incoming call matching ***ĭescription *** for outgoing 9 Traffic to PSTN ***.Setup New Partition under -> Call Routing -> Partition.Setup New Calling Search Space under Call Routing -> Class of Control -> Call Search Space.Setup New Gateway under Device -> Gateway.I have a feeling I might miss something on the CUCM side.Ĭan anyone tell me what is the best practice or the easier way to set that up with my current scenario? I tired it all but nope of the configurations seem working after all. I did a lot of research and reading and I know there are so many ways to do it such as creating translation-rule/ plar opx immediate on the gateway directly or translation patterns directly on CUCM. I am trying to do some basic setup and the first thing I want to do is to tie the analog phone number 1(234)567-8900 to CUCM ext 500 so that ext 500 can receive phone calls from the outside and also dial out locally. The analog phone line is currently connected to the 2911 FXO port 0/0/0. Now I have a test analog line with phone number 1(234)567-8900 and need to dial 9 to connect to the local PSTN.

Everything works fine in the head office and all internal extensions are in 3 digital xxx formats from ext 100 to ext 700. Head office is currently using H323 voice gateway 2851 with CUCM 8.6 and need to dial 8 to dial out to local PSTN. It is a H323 voice gateway as the same gateway as the head office. The voice gateway is a CISCO ISR 2911 with couple of FXO ports (the remote office will have 5 analog lines with totally different numbers other than the area code). I am trying to setup a new voice gateway for the remote office and it will be using SRST later on.

Cisco receiver counting down letters and numbers